RoMac Digital Distortion Meter Registration Code Simple, lightweight, universal software that measures Audio Distortion by calculating the levels of distortion products introduced by a device under test. The software is capable of performing as a Audio Function Generator. The software and hardware combination allows for easy measurement of the distortion levels of any frequency and frequency range using any sound card. And now, the Distortion Meter will calculate the distortion levels from a frequency sweep and show all of the important test results in just seconds. It is designed to provide an accurate and effective method of measuring and documenting the amount of distortion products introduced by your audio gear. With the RoMac Digital Distortion Meter, a microcomputer, and a sound card, you have the ability to measure, document, and communicate your results. The RoMac Digital Distortion Meter is the first affordable digital distortion meter for the Amateur Radio Community and Audio Experimenters. Key Features: • High accuracy audio frequency and distortion test • Sound card resolution: +/- 13 Hz • Supports a 16 bit sound card (32 bit sound card required for additional features). • Automatically adjusts sample rate and bandwidth according to the resolution of the sound card • Unmatched test frequency sweep • Unlimited combination of frequency, wave type, sweep time • No notch filters are required, and no separate digital to analog converter is required. (Sound card input will suffice). • Input and output level indicators are provided. • Data can be printed. • Automatic Lock - lock on the test frequency signal for automatic measurement • Repeat measurement - allows measurement on multiple setups of the device under test and capture the results • Audio Function Generator - can be used as a Function Generator for a test setup with a sweep generator • Multiple waveforms - multiple simultaneous waveforms from a single computer • Swept the test frequency - sweep the test frequency from the lowest to the highest • Individual channel analysis - when connected to a sound card with multiple input channels, be able to measure and record individual channels • Output level meters - measure the input and output levels, and lock the test frequency • Print - when results are complete, the data can be printed to a text file • Package Size - size of the software is 29.5 MB • Software Compatible - works with any microcomputer operating system, including Microsoft Windows 95/98/ME/NT/2000/XP, Apple OS X 10.3.9 and most Linux OS's • Supports - Sound Blaster 16, X-Fi, Creative Labs Audigy RoMac Digital Distortion Meter Crack + (April-2022) The RoMac Digital Distortion Meter software is a powerful tool that you can use to test the audio electronics you have at home or at work. There are two test instruments available. The Frequency Distortion Test will measure the harmonic distortion of any audio source, and will include the over-loading of your sound card. The Function Generator is a unique tool for testing audio transformers and audio amplifiers. Menu: Start: Start the audio distortion meter. Stop: Stop the audio distortion meter. Reset: Reset the audio distortion meter. Frequency Offset: Set the test frequency offset. Frequency: Test frequency in Hz. Sweep Time: Test time in seconds. Sweep Type: Type of waveform produced by the function generator. Output Offset: Turn this setting on or off. Output: Read the current output levels on the audio input and output. Input Offset: Turn this setting on or off. Input: Read the current input levels on the audio input and output. Notch Filter: Turn this setting on or off. No Distortion: Set the test frequency and sweep time, but do not test for harmonic distortion. Advanced: Test the digital to analog converter on the sound card. Noise Measurements: Set the test frequency and sweep time and print out a plot of the noise power. Measure All Inputs: Set the test frequency and sweep time and print out a plot of the noise power. Measure All Outputs: Set the test frequency and sweep time and print out a plot of the noise power. Measure Distortion of the Signal Source: Set the test frequency and sweep 1a423ce670 RoMac Digital Distortion Meter X64 [2022-Latest] Keymacro is an open source software automation software that allow you to control virtually anything that has a USB interface. Download Keymacro here RoMac Software announced today the availability of the new RoMac Audio Analyzer software. The new RoMac Audio Analyzer software was built from the ground up for the purpose of measuring audio frequency distortion products such as the third harmonic and fifth harmonic distortions produced by a device under test. By using an instrument that can measure the distortion products, an Audio Amplifier can be tested at a voltage that is 10 times lower than when using the distortion meter. This means you can use that voltage for testing circuits that have very little current available. Audio Amplifiers and Amplifier Modules are commonly used in Audio Equipment such as Stereo Equipment, Audio Mixers, Power Mixers and Audio Transmitters. The new RoMac Audio Analyzer software is capable of measuring the third and fifth harmonic distortions and the low harmonic distortion of audio. For Audio Amplifiers and Transmitters, the software can measure: - Harmonic Distortion - Third Harmonic Distortion - Fifth Harmonic Distortion - Low Harmonic Distortion - First Harmonic Distortion To measure the distortion of audio devices, the software includes a complete set of frequency filters that are programmed to analyze the sound of each particular frequency. For Audio Amplifiers, a signal of a given frequency is received and a test signal is produced of the same frequency. This test signal is then measured by the RoMac Audio Analyzer and the results are displayed. The output is in numerical form. The numerical form may be used for any mathematical calculation. The new RoMac Audio Analyzer software includes a complete set of the "Function Generator" channels. The software may be used as a two tone generator that is used for testing audio components and audio transmitters. The new software also has a Frequency Analyzer channel that can be used to measure frequency distortion and gain. The new software also has a delay time analyzer channel that can be used to measure the time distortion and delay introduced by a device under test. The RoMac Audio Analyzer software may be purchased in both 32 and 64 bit versions. Purchase includes a detailed manual with screenshots and a User's Guide. RoMac Software is proud to announce the release of the new RoMac Audio Analyzer software. The new RoMac Audio Analyzer software was built from the ground up for the purpose of measuring audio frequency distortion products What's New In? System Requirements For RoMac Digital Distortion Meter: OpenGL 3.3 or higher Windows Vista, Windows 7, Windows 8, or Windows 8.1 DirectX 11 or higher 2 GB of available hard-disk space 1 GB of RAM 1 GHz of CPU power PLAY THE DEMO Features Play all of the games of the GROM Champions Saga series on one disk! You can use the Main Menu to navigate to your desired game. In fact, there is even a Main Menu for each game! Play the games of the GROM Champions
Related links:
Comments